Universal end mill SPM HPC TiAlN 3 mm GARANT

Description

Version: New substrate SPM with a very high amount of cobalt. Combines the hardness of solid carbide with the toughness of PM steel. Multi-flute end mill with universal geometry. Can be used as a finishing end mill, semi-roughing or roughing end mill. Application: Suitable for: • 74 m/min cutting speed (vc) in unalloyed quenched and tempered steels up to 900 N/mm2, unalloyed case-hardened steels up to 900 N/mm2, nitriding steels up to 900 N/mm2, tool steels up to 900 N/mm2. • 42 m/min cutting speed (vc) in alloyed quenched and tempered steels up to 1100 N/mm2, alloyed case-hardened steels up to 1100 N/mm2, alloyed tool steels up to 1100 N/mm2. • 32 m/min cutting speed (vc) in high speed steel up to 1200 N/mm2, alloyed quenched and tempered steels up to 1400 N/mm2, alloyed case-hardened steels up to 1400 N/mm2, alloyed tool steels up to 1400 N/mm2, wear-resistant structural steels up to 1350 N/mm2, spring steels up to 1500 N/mm2. • 26 m/min cutting speed (vc) in sulphuretted stainless steels up to 700 N/mm2, austenitic stainless steels up to 850 N/mm2. • 21 m/min cutting speed (vc) in stainless and acid-free steels martensitic / ferritic up to 1100 N/mm2. • Free cutting steels, free cutting stainless steels, aluminium and non-ferrous metals. • Applicable with emulsion with at least 4 % grease content (for tapping at least 8 %). • Applicable for dry machining • For use with compressed air feed.