Conical flap discs are a high performance alternative to sanding discs where surface finish is important. On light gauge sheet metal, the overlapped abrasive strips slowly wear away revealing fresh abrasive. | | Features and Benefits | • The overlap design reduces clogging and ensures the disc always cuts effectively and | • Provides a consistent finish throughout disc life | • No backing pads needed | | Notes | • Safe to use at 80m/s on any grinder | | Standards | EN12413
| Brand |
|---|
Grit: P100/400 Grade: Medium/Coarse Shape: Rectangular To produce sharp cutting edges or to remove burrs For general sharpening and honing applications Suitable for wet and dry production
Flap discs grind like depressed centre wheels and finish like fibre discs. Type 29 Backing material: Fibre glass No thread Engineered for stock removal, blending and finishing all in one application Ideal to eliminate the use of conventional grinding wheels, sanding or fibre discs in many application No backing pads needed Safe to use at 80m/s on any grinder EN12413
30SWG Pointed end Max. speed (rpm): 20,000 Bristle type: Crimped wire Bristle material: Brass wire Mounting type: Shaft mounted Shaft diameter: 6.0mm Ideal for hard to reach areas such as drilled holes, recesses and corners Suitable for removal of burrs, rust and paint
All points are aluminium oxide with rubenite as standard. Suitable for portable die and straight hand grinders For all general purpose grinding and deburring on steels and most metals Maximum speeds are quoted assuming that collet to back of point does not exceed 12.7mm (1/2″) (for guidance only)
Reviews
There are no reviews yet.