KOBE GREEN LINE
Showing 1–9 of 16 resultsSorted by popularity
-
Disc Air Sanders3″ MINI POLISHER KIT
GMPK3 0.25HP Free speed (rpm): 2,500 Air inlet thread: 1/4″ NPT Min. air hose size (ID): 10mm (3/8″) Air pressure: 90PSI/6.2Bar Max. disc diameter: 90mm Overall length: 115mm Suitable for use in confined areasKit contains:1x each polishing sponges (fine & coarse)1x polishing bonnet1x 75mm backing pad1x spanner
(0 reviews) -
Disc Air SandersFSH 6″ TWO HAND SANDER
FSO150 Featuring rotating air inlet to prevent the air hose tangling, speed control and ball bearing. 0.20HP Free speed (rpm): 10,000 Air inlet thread: 1/4″ NPT Spindle thread: 5/16″ Min. air hose size (ID): 10mm (3/8″) Air pressure: 90PSI/6.2Bar Pad diameter: 150mm Overall length: 210mm Weight: 1.04kg Suitable for shaping, blending, smoothing and material removal Can be used for wet sanding
(0 reviews) -
Air Impact WrenchG7321, Impact Wrench, Air, 3/8in, 10200rpm, 393Nm, 1/4in
G7321 Featuring twin hammer mechanism and ergonomic handle. Free speed (rpm): 8,000/9,100/10,100 Reverse speed (rpm): 10,200 Square drive: 3/8″ Working torque range: 339 – 393Nm Air inlet thread: 1/4″ NPT Min. air hose size (ID): 10mm (3/8″) Air pressure: 90PSI/6.2Bar Overall length: 160mm Weight: 1.39kg Reversible Ideal for light workshop and garage use
(0 reviews) -
Air Ratchet WrenchesFSR375, Ratchet Wrench, Air, 3/8in, 200rpm, 41Nm, 1/4 in
FSR375 Featuring planetary gears, low profile teasing throttle, rotating rear exhaust with baffle and rotating air regulator. Free speed (rpm): 200 Square drive: 3/8″ Working torque range: 7 – 41Nm Air inlet thread: 1/4″ NPT Min. air hose size (ID): 10mm (3/8″) Air pressure: 90PSI/6.2Bar Overall length: 205mm Weight: 0.64kg Reversible Ideal for removals and installations of threaded fasteners Suitable for use in confined areas
(0 reviews) -
Air Impact WrenchKSW120, Impact Wrench, Air, 1/2in, 10000rpm, 1302Nm, 1/4in
KSW120 Featuring speed regulator, downward facing exhaust and soft grip handle. Free speed (rpm): 10,000 Square drive: 1/2″ Working torque range: 34 – 407Nm Air inlet thread: 1/4″ NPT Min. air hose size (ID): 10mm (3/8″) Air pressure: 90PSI/6.2Bar Overall length: 120mm Weight: 1.54kg Reversible Ideal for light workshop and garage use Suitable for use in confined areas
(0 reviews) -
Air Ratchet WrenchesFSR500, Ratchet Wrench, Air, 1/2in, 150rpm, 68Nm, 1/4 in
FSR500 Featuring planetary gears, low profile teasing throttle, rotating air inlet with baffle and rubber handle. Free speed (rpm): 150 Square drive: 1/2″ Working torque range: 14 – 68Nm Air inlet thread: 1/4″ NPT Min. air hose size (ID): 10mm (3/8″) Air pressure: 90PSI/6.2Bar Overall length: 265mm Weight: 1.2kg Reversible Ideal for removals and installations of threaded fasteners Suitable for use in confined areas
(0 reviews) -
Air Die GrinderFDG180e Extended Spindle Inline Die Grinder with Composite Body and Speed Control 25,000rpm
FDG180E Featuring rubber handle, speed regulator, safety release throttle and rear exhaust. 0.30HP Free speed (rpm): 25,000 Collet size: 6mm (1/4″) Air inlet thread: 1/4″ NPT Min. air hose size (ID): 10mm (3/8″) Air pressure: 90PSI/6.2Bar Overall length: 253mm Ball bearing construction Ideal for polishing, buffing, deburring and grinding For extra reach in ‘hard to get at’ areas Supplied with collet spanners
(0 reviews) -
Air Die GrinderFDG180m – Inline Die Grinder with Composite Body and Speed Control 25,000rpm
FDG180M Featuring rubber handle, speed regulator, safety release throttle and rear exhaust. 0.30HP Free speed (rpm): 25,000 Collet size: 6mm (1/4″) Air inlet thread: 1/4″ NPT Min. air hose size (ID): 10mm (3/8″) Air pressure: 90PSI/6.2Bar Overall length: 158mm Ball bearing construction Ideal for polishing, buffing, deburring and grinding Supplied with collect spanners
(0 reviews) -
Air Die GrinderFDG115 115? Angle Die Grinder with Composite Body and Speed Control 22,000rpm
FDG115 Featuring speed regulator, safety release throttle and rear exhaust. 0.30HP Free speed (rpm): 22,000 Collet size: 6mm (1/4″) Air inlet thread: 1/4″ NPT Min. air hose size (ID): 10mm (3/8″) Air pressure: 90PSI/6.2Bar Overall length: 195mm Ball bearing construction Ideal for polishing, buffing, deburring and grinding Supplied with collet spanner
(0 reviews)