Pullers & Separators
Showing 1–9 of 26 resultsSorted by popularity
-
Pullers - Mechanical
LONG JAW MECHANICAL PULLER
Drop forged hardened alloy steel Three position extra-long legs to be used where access is limited Spread: 10-50mm Reach: 300mm Weight: 1.2kg
(0 reviews) -
Separators & Coil Spring Compressors
SPRING COMPRESSOR SET – 2 LEGGED
2 Legged Type Central hexagonal drive with wrap over coil claws which can be reversed for spreading applications Harden steel screws and cast steel claws Suitable for use on cars and commercial vehicles Use with 21mm/13/16″ AF open ended spanner Max jaw opening: 250mm3 Legged Type Harden steel screws and cast steel claws Each leg has one free moving claw and one threaded claw with a 1/2″ square drive or 24mm hexagon drive Can be used with air tools or spanners Max jaw opening: 240mm
(0 reviews) -
Separators & Coil Spring Compressors
150mm BEARING SEPARATOR
For removing bearings, gears and bushes from shafts where access with a mechanical puller is restricted Separators have tapered edge for insertion behind close fitting bearings, gears and bushes Jaw hardness: 42 – 45 HRC.
(0 reviews) -
Pullers - Hydraulic
HYDRAULIC BEARING SEPARATOR SET 105-150mm
HS7 Kit capacity: 105 – 150mmHS11 Kit capacity: 75 – 105mmFor removing bearings, gears, sprockets and bushes. 10 ton capacity hydraulic ram with tommy bar. Metal storage case. Both sets contain:1x hydraulic ram.1x separator.2x 200mm main rods.2x 230mm extension rods.1x beam.1x ram nut. HS7 (only) comes with1x 80mm push plate.1x 50mm ram extension.1x 100mm ram extension.
(0 reviews) -
Separators & Coil Spring Compressors
75mm BEARING SEPARATOR
For removing bearings, gears and bushes from shafts where access with a mechanical puller is restricted Separators have tapered edge for insertion behind close fitting bearings, gears and bushes Jaw hardness: 42 – 45 HRC.
(0 reviews) -
Separators & Coil Spring Compressors
UNIVERSAL BALL JOINT REMOVER
Made from drop forged alloy steel with slim tapered fork jaw for easier access into confined areas Suitable for use on most cars and light commercial vehicle ball jointsUniversal Ball Joint Remover:Overall length: 100mm.Capacity: 22mm.Throat width: 22mm.Throat depth: 22mm.Ball Joint Separator:Overall length: 160mm.Capacity: 45mm.Throat width: 18mm.Throat depth: 22mm.
(0 reviews) -
Pullers - Mechanical
INTERNAL & EXTERNAL PULLER KIT
YC-607 Fully hardened and chromed carbon steel slide hammer with a 1.2kg weight. Slide hammer design for removing bearings from blind housings Suitable for use where a shaft or other solid surface is not available for a thrust bolt or hydraulic ram to push against The bearing is removed by the impact action of the slide hammer weight hitting the stop at the end of the bar Puller legs are securely located on the bearing by screwing down the tapered nut to lock the arms in position Contents:1x T-bar.1x hammer.1x two jaw head.1x three jaw head.1x leg locking nut.1x grip wrench adaptor.1x tapping adaptor and hook.2x axle pullers.3x 120mm puller legs.3x screw and nut assemblies.1x blow moulded storage case.
(0 reviews) -
Pullers - Hydraulic
HYDRAULIC BEARING SEPARATOR SET 75-105mm
HS7 Kit capacity: 105 – 150mmHS11 Kit capacity: 75 – 105mmFor removing bearings, gears, sprockets and bushes. 10 ton capacity hydraulic ram with tommy bar. Metal storage case. Both sets contain:1x hydraulic ram.1x separator.2x 200mm main rods.2x 230mm extension rods.1x beam.1x ram nut. HS7 (only) comes with1x 80mm push plate.1x 50mm ram extension.1x 100mm ram extension.
(0 reviews) -
Pullers - Hydraulic
10- TON HYDRAULIC RAM
Spring loaded plunger Direct non-twisting application of thrust Fully threaded body Length: 190mm Diameter of ram: 38mm Thread pitch: 16 gauge x 3/8 BSW Weight: 1.4kg
(0 reviews)